Replacing The Light Bulbs - GE Model 18 Owner's Manual And Installation Instructions

Careand cleaning of the refrigerator.
Behind the Refrigerator
Be careflfl when moving the refrigerator
away from tbe wall. All types of floor
coverings can be damaged, particularly
cushioned coverings and those with
embossed surfaces.
Pull the refiigerator straight out and return
it to position by pushing it sn'aight in.
Moving tbe refrigerator in a side direction
may result in damage to the floor covering
or refiigerator.
When pushing the refrigerator back,
make sure you don't roll over the
power cord.
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigeratol: Move
the control to tile 0FFposition, and clean
the interior with a baking soda solution
of one tablespoon ( 15 ml) of baking soda
to one quart (1 1) ofwaten Leave the
doors open.
lfan icemaker is installed, move the
icemaker feeler arm to the
STOP (up)
position and shut off the water supply
to the refiigeraton
Preparing to Move
Secure all loose items such as grille,
shelves and drawers by taping them
securely in place to prevent damage.
Besure therefrigeratorstays in an upright
position duringmoving.
Replacing the Light Bulbs
To replace a burned-out bulb, unplug the
refrigerator from its electrical oudet.
In the refrigerator compartmen_ remove
tbe lens cover by gently applying pressure
to tbe back corners of the lens cover and
pulling the cover free from the control
housing. Undrew tbe bulb when cool
and replace it with an appliance bulb
of tbe same or lower wattage.
There is also a light in tbe refrigerator
control panel. To replace it, simply
unscrew the bulb when cool and
replace it with an appliance bulb of
tbe same or lower wattage.
IIIthe freezer compartment, simply undrew
and replace the bulb 'after ensuring tbe
refrigerator is unplugged.
Turning thecontrolto theOFF position doesnot
remove powerto thelightcircuit.
12