GE JGB920 Owner's Manual And Installation Instructions page 31

The oven door must be closed and all controls set correctly for the cycle to work properly.
DELAY
START
How to Delay the Start of Cleaning
Make sure tile (lo(k showsthe (oned
time of day.
[] Tou(h the SELFCLEAN pad.
[] Using the number pads, enter the
desired dean time.
[] Tou(h the DELAYSTARTpad. The
earliest start time you (an set will
appear in tlle display.
[] Using the number pads, enter the
time of (by you want the clean o_cle
[O S[;/I'[.
[]
Touch tile START pad.
The door locks mltomatically. The
display will show the s/mt time. It will
not be possible to open the oven door
until the temperature &ops beh)w the
lock temperaune and the LOCKED DOOR
light goes oil
When the LOCKED DOORlight is off, open
tlle door.
After a Clean Cycle
You may notke some white ash in the
oven. Wipe it up with a damp (loth after
the oven cools.
If whitespotsremain, r emove themwith a soap-
filledsteel-wool p ad andnnsethoroughly w ith a
vinegar a nd watermlkture.
These deposits ;ue usually a sah residue
that cannot be removed by tile clean o_cle.
If the oven is not clean afiei one clean
o_cle, repeat tile o_cle.
You cannot set the oven for cooldng
until the oven is cool enough for tile
door to unlo(k.
:, While tile oven is self cleaning, you
can touch the CLOCK pad to display
the time of (by. To remm to the
clean countdox_l_, touch the COOKING
TIME pad.
:, If tile shelves become hard to slide,
apply a small mnount of vegetable oil or
cooking oil to a paper u)wel and wipe
the edges of the oven shelves with the
paper towel.
3I