Care And Cleaning - Thermador HGEW 36 FS Use And Care Manual

CARE AND CLEANING
/_k WARNING To avoid risk of fire and explosion do not use flammable liquids or
solvents.
Always unplug or disconnect the appliance from the power supply before servicing.
IMPORTANT: Do not clean the hood with
abrasive sponges or with cleaning agents
which contain sand, soda, acid or chlorine!
[] Clean the hood with a hot soap solution
or a mild window cleaner.
[] Do not scrape off dried-on dirt but wipe
off with a damp cloth.
[] When cleaning the grease filters, remove
grease deposits from accessible parts of
the housing.
This prevents the risk of fire and ensures
that the hood continues operating at
maximum efficiency.
[] Note: Do not use alcohol (spirit) on
plastic surfaces, as dull marks may
appear.
Caution: Observe all instructions and
cautions provided with cleaners.
IMPORTANT: Clean the operating buttons
with a mild soapy solution and a soft, damp
cloth only.
Do not use stainless-steel cleaner to clean
the operating buttons.
Stainless steel surfaces:
[] Use a mild non-abrasive stainless steel
cleaner.
[] Clean the surface in the same direction
as it has been ground and polished.
[] We recommend the stainless steel
cleaner Fantastik ®or Formula 409 ®
sprayed onto a paper towel.
Aluminum and plastic surfaces:
[] Do not use dry cloths.
[] Use a mild window cleaning agent.
[] Do not use aggressive, acidic or caustic
cleaners.
Observe the warranty regulations in the
enclosed service booklet.