Care And Cleaning; To Clean Hood Surface; To Clean Filters And Troughs - Thermador An American Icon PH30ZS Care And Use Manual

Ph and phi series professional wall and island hoods

Hide thumbs Also See for An American Icon PH30ZS:

Installation instructions manual (33 pages)

Service manual (16 pages)

Care and use manual (8 pages)

Table Of Contents

Table of Contents

Available languages

To Clean Hood Surface

•

For general care, wipe the outside of the

stainless steel with sudsy water or household

cleaners such as Fantastic

rinse well and dry with a clean soft cloth to

avoid water marks.

•

Wipe and dry stainless steel in the same

direction as the grain. Avoid using too much

pressure, which may mar the surface.

•

Do not use abrasive products such as steel

wool.

•

To remove finger prints and give added shine,

use spray cleaners such as Stainless Steel

Magic

and Shimmer

•

Do not allow any cleaning compounds to

remain in contact with stainless steel for ex-

tended periods.

To Clean Filters and Troughs

Your hood has removable aluminum filters, grease

troughs and side panels. They must be cleaned

when the filter light illuminates on the control panel

or whenever they collect the grease. When used

over a grill, wok or other high grease applications,

more frequent cleaning may be required.

To Remove Filters and Grease

Troughs:

•

Turn the fan and lights off. Be sure filters are

cool and grease has congealed before re-

moval.

•

Remove in the following order:

1. Filters -Start with center filters, push

up, then pull out from the bottom.

2. Side Panels - Remove these the same

way as the filters.

3. Grease Troughs - lift up and out.

•

The filters can be washed by hand or in the

dishwasher.

Reverse the above directions to reinsert the trough,

filters and side panels.

Note: Depending upon the size and model of hood,

there will be anywhere from 1 to 3 filters per hood.