Initializing; Version Upgrading - Epson UB-E02 Technical Reference Manual

5.5.6 Initializing

To initialize the UB-E02 when the power is turned on or reset, the standby period is required for
10 seconds. During this period. All network functions do not work.
The waiting time is:
When the IP address setting is Manual (Fixed):
When the IP address setting is Auto:

5.5.7 Version Upgrading

The module can upgrade its own firmware over the network.
5.5.7.1 Supported protocol
TFTP
5.5.7.2 Upgrade Methods
By TFTP command (for Windows XP/2000/NT4.0)
For more information, ask your dealer.
Rev. A
UB-E02 Technical Reference Guide
approximately 6 seconds
approximately 13 seconds
(It can be longer, depending on the reply
time of the host.)
Specifications 5-9