Advertisement
Quick Start Guide Wireless N Gigabit Router
Internet Connection Wizard
1.
Click on the Internet Connection Setup Wizard button to begin the process.
2.
The Wizard requires that you configure the password, time zone, and Internet (WAN) connection.
Click on the Next button to continue.
3.
By default, the device does not use a password. Specify a password for administrator access to the
device, then type the password once more in the Verify Password field. Click on the Next button
to continue.
4.
Select your time zone from the drop-down list Click on the Next button to continue.
5.
The next step in the wizard is the Internet Connection, select the WAN connection type from the list,
and then click on the Next button to continue with the wizard.
WAN DHCP
1.
Select the DHCP Connection (Dynamic IP Address) radio button and then click on the Next
button.
2.
You have the option of cloning your PCs MAC address onto the device. Click on the Clone Your
PCs MAC Address to automatically copy the MAC address. You may also specify a host name.
Click on the Next button to continue.
3.
The WAN configuration is complete. Click on the Connect button to connect to the Internet.
PPPoE
1.
Select the PPPoE radio button and then click on the Next button.
2.
Address Mode: PPPoE can be used with a dynamic or static IP address. If you select the
Dynamic IP radio button, then the IIP address in the next field is not required. However, if you
select the Static IP radio button, then the IP address in the next field is required.
3.
User Name: Specify the user name which is provided by your ISP.
4.
Password: Specify the password which is provided by your ISP, and then verify it once again in
the next field.
5.
Service Name: Specify the name of the ISP.
6.
Click on the Next button to continue.
7.
The WAN configuration is complete. Click on the Connect button to connect to the Internet.
PPTP
1.
Select the PPTP radio button and then click on the Next button.
2.
Address Mode: PPTP can be used with a dynamic or static IP address. If you select the Dynamic
IP radio button, then the IIP address in the next field is not required. However, if you select the
Static IP radio button, then the IP address in the next field is required.
3.
PPTP Address: Specify the IP address
4.
PPTP Subnet Mask: Specify the subnet mask for the IP address.
5.
PPTP Gateway IP Address: Specify the IP address of the PPTP gateway.
6.
PPTP Server IP Address: If the PPTP Server's IP address is different from the default gateway,
then you may specify it here.
7.
User Name: Specify the user name which is provided by your ISP.
8.
Password: Specify the password which is provided by your ISP, and then verify it once again in
the next field.
9.
Click on the Next button to continue.
10. The WAN configuration is complete. Click on the Connect button to connect to the Internet.
Quick Start Guide v.1.0
ESR-9710 Wireless N Gigabit Router
3
Advertisement
