Before You Start The Remote Ui - Canon MF5750 - ImageCLASS B/W Laser Remote Ui Manual

Before You Start the Remote UI

Before you start the Remote UI, check the following:
1
■ Network Settings
Select <VIEW IP ADDRESS> from the <NETWORK SETTINGS> menu, and verify the IP
address of the machine. If you do not know the IP address, consult with your network
administrator. (See Chapter 2, "Specifying the Network Settings," in the Network Guide.)
IMPORTANT
•
Connection via a proxy server is not possible. If your system environment has a proxy
server, perform the following settings. (Settings vary according to the system
environment, so please consult with your network administrator.)
- Enter the device IP address into Exceptions in the web browser proxy server settings.
- Set your web browser to enable all cookies.
•
If the operation panel of the machine is being used, do not perform the same operations
from the Remote UI.
•
If multiple Remote UIs are running simultaneously, the latest setting made is enabled. It
is recommended that only one Remote UI is running at the same time.
1-6
Before You Start the Remote UI