Preparation; Installing Batteries - Radio Shack 5-In-One Learning Light-Up Remote Owner's Manual

ˆ

Preparation

After installing the batteries (not included), you can im-
mediately use the remote (with its factory-programmed
settings) to control an RCA TV, VCR, and DIRECTV re-
ceiver, as well as a Pioneer DVD player and auxiliary de-
vice. To control other brands, you must perform some
simple programming to overwrite the default parameters.
For best results, read and perform all remaining instruc-
tions. Also, keep these instructions for future reference.
If you experience any difficulties programming your re-
mote, call customer service at 888-631-9859.

INSTALLING BATTERIES

Your remote requires four AAA batteries (not supplied)
for power. For the best performance and longest life, we
recommend RadioShack alkaline batteries.
Cautions:
• Use only fresh batteries of the required size and
recommended type.
• Do not use rechargeable batteries.
• Do not mix old and new batteries or different types
of batteries (standard or alkaline).
• Always remove old or weak batteries. Batteries can
leak chemicals that can destroy electronic parts.
Note: Do not press any of the remote control's keys
while installing batteries.
Follow these steps to install batteries.
1. Press the battery compartment cover's tab and lift
off the cover.
2. Place the batteries in the compartment as indicated
by the polarity symbols (+ and –) marked inside.
3. Replace the cover.
8
Preparation