B Regulatory Compliance; Safety Standards; Place Battery Marking - Intel BOXDP55SB Product Manual

B Regulatory Compliance

This appendix contains the following regulatory compliance information for Intel
Desktop Board DP55SB:
•

Safety standards

• European Union Declaration of Conformity statement
• Product Ecology statements
• Electromagnetic Compatibility (EMC) regulations
• Product certifications

Safety Standards

Intel Desktop Board DP55SB complies with the safety standards stated in Table 18
when correctly installed in a compatible host system.
Table 18. Safety Standards
Regulation
CSA/UL 60950-1, First
Edition
EN 60950-1:2006, Second
Edition
IEC 60950-1:2005, Second
Edition

Place Battery Marking

There is insufficient space on this Desktop Board to provide instructions for replacing
and disposing of the Lithium ion coin cell battery. For system safety certification, the
statement below or an equivalent statement is required to be permanently and legibly
marked on the chassis near the battery.
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.
A suitable caution label is included with Intel Desktop Board DP55SB.
Related Links
For information about replacing the battery, go to page 61.
Title
Information Technology Equipment – Safety - Part 1: General
Requirements (USA and Canada)
Information Technology Equipment – Safety - Part 1: General
Requirements (European Union)
Information Technology Equipment – Safety - Part 1: General
Requirements (International)
79