Table of Contents
Advertisement
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step 1, 2, 3, you can start to install Windows
XP 64-bit OS on your system. At the beginning of Windows
a third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette
containing the NVIDIA
®
RAID driver. After reading the floppy disk, the drivers will be
presented. Select the drivers to install. The drivers are as below:
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
Please select A and B for Windows
two RAID drivers needed for RAID mode, you have to select them separately. Please
specify the first RAID driver and then specify again for the second one.)
NOTE. If you install Windows
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID]
in BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
1.3.2 Installing Windows
Functions
If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Insert the Windows
Vista
drive to boot your system, and follow the instruction to install Windows
Windows
®
Vista
TM
64-bit OS on your system. When you see "Where do you want to
®
2000 / XP / XP 64-bit OS on your system.
®
2000 / Windows
®
2000 / XP / XP 64-bit in RAID mode. (There are
®
2000 / Windows
®
XP / Windows
®
TM
TM
Vista
/ Vista
®
TM
®
Vista
/ Windows
Vista
Advanced screen
®
TM
TM
Vista
/ Vista
64-bit OS on your system.
TM
®
TM
/ Windows
Vista
64-bit optical disk into the optical
6
®
XP / Windows
®
setup, press F6 to install
®
XP 64-bit on IDE
64-bit With RAID
TM
64-bit on your SATA / SATAII
IDE Configuration.
®
Vista
®
TM
/
Advertisement
Table of Contents
