Table of Contents
Advertisement
4.
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
R
P5LD-MR
P5LD-MR Keyboard Power Setting
5.
RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1-2 if you want
to use the LSI Logic Embedded SATA RAID Setup Utility (default);
otherwise, place the jumper caps to pins 2-3 to use the Intel
Storage Manager.
R
P5LD-MR
P5LD-MR RAID_SEL1 Setting
ASUS P5LD-MR
KBPWR1
1 2
2 3
+5V
+5VSB
(Default)
RAID_SEL1
1
2
2 3
LSI RAID ROM
INTEL RAID ROM
(Default)
Matrix
®
2-21
Advertisement
Table of Contents
