Table of Contents
Advertisement
Removing the Antennas
1.
See "Removing the LCD Panel" on page 94.
2.
Remove the tape securing the Microphone cable to the antenna cables.
3.
Lift up the shielding holding the right Antenna cable in place. Ensure that the cable is free from all
fasteners.
4.
Carefully pry up the right Antenna pad, as shown, and remove the pad from the LCD Module.
IMPORTANT: A strong adhesive is used to secure the Antenna pad in place. Take care not to bend the pad during
removal.
Chapter 3
100
Advertisement
Table of Contents
