Table of Contents
Advertisement
Rinse aid
Rinse aid ensures thorough rinsing, spot and streak free drying of
dishes and glassware.
Rinse aid can be added in one of two ways:
• Use the dishwasher detergent and rinse aid separately, add the rinse
aid to the rinse aid container.
If you opt for this method, please note that
– the rinse aid container must never be empty.
– the amount of rinse aid dispensed must be set.
• If you use dishwasher detergent which already contains rinse aid, add
this to the detergent compartment.
If you opt for this method, please note that
– the rinse aid container must be empty in order to avoid dispensing
too much rinse aid.
– You can switch off the RINSE AID control indicator. Otherwise, the
RINSE AID control indicator would stay on permanently owing to
the empty container.
Only use rinse aid specifically designed for domestic dishwashers. Never
1
fill the rinse aid container with dishwasher detergent or any other sub-
stance (e.g. vinegar essence) as this would damage the appliance.
To switch off rinse aid control indicator
0
1. The appliance must be switched off.
2. Press the softener and function buttons simultaneously and keep them
pressed.
3. In addition press the ON/OFF button.
The LED indicators for the function and water softener buttons flash.
4. Press the function button again.
The LED indicator for the function button flashes.
5. The END indicator shows the current setting:
END
The
indicator flashes:
END
indicator does not flash: Control indicator switched off
The
6. Pressing the function button switches the control indicator on or off.
7. If the control indicator is set, press the ON/OFF button.
The setting for the control indicator is then stored.
Control indicator switched on (factory setting)
Operating Instructions
13
Advertisement
Table of Contents
