Cassette Recording - Emerson MS9933TT Owner's Manual

CASSETTE RECORDING

To record from the radio or CD changer:
1.) Press the POWER button to turn the system ' On' .
2.) Press the TUNER/BAND or CD/DISC SKIP button to select the appropriate
function. The TUNER or CD indicators will appear in the display.
3.) Press the STOP/EJECT key of Deck A to open
the cassette door. Insert a blank tape into the
slots on the door with the exposed tape facing
down and the full reel on the left side. Close
the cassette door.
4.) Operate the Tuner or CD changer to select the
material you wish to record.
Follow the instructions for LISTENING TO THE
RADIO or COMPACT DISC PLAYBACK if
necessary.
5.) When you are ready to begin recording, depress the RECORD key on Deck A.
(The PLAY key will also engage.) The music from the radio or CD will be
recorded directly on to the tape.
• Use the PAUSE key to stop the tape momentarily to avoid recording unwanted
material such as radio commercials.
• You can adjust the VOLUME and BASS BOOST and preset EQ controls during
the recording. These controls have no effect on the material being recorded
on the tape.
6.) When you have finished recording, press the STOP/EJECT key to stop the
tape.
Press again to open the door and remove the tape. When the tape ends, the
PLAY and RECORD keys are released automatically and the tape motor stops.
7.) To record on the other side of the tape, turn the cassette over so that the full
reel is again on the left side, and press the RECORD key again.
MS9933TT_050304.p65
28
28 3/5/2004, 10:25