Emerson MS9933TT Owner's Manual page 17

To Begin CD Playback
After you have loaded up the 5 CDs in the changer:
1.) Press the PLAY/PAUSE
for the first available disc in the tray and will
begin playback from Track 1 on the first disc.
The number of the disc being played flashes
on the display. It will continue playing until it
has played all of the discs in the tray and
then stops automatically.
NOTE: To begin playback from a specific disc, press the CD/DISC SKIP
button to select the desired disc, and then press the PLAY/PAUSE
button.
Or, press the appropriate disc button (DISC 1, DISC 2, DISC 3, DISC 4,
DISC 5) for the disc you wish to start. Playback will begin on Track 1 of the
selected disc. It stops automatically after finished playing all discs.
2.) Adjust the VOLUME, BASS BOOST, or EQ controls as desired.
3.) To temporarily stop playback, press the PLAY/PAUSE
II
" " indicator appears in the display, and the play time flashes.
The disc continues to spin, but no sound is
heard. Press the PLAY/PAUSE
once more to cancel pause and resume
playback.
4.) To stop playback before the end of a disc, press the STOP
IMPORTANT
If the disc is smudged or scratched it may skip or stop completely. This does
not indicate a problem with the player. If this occurs, try playing another disc.
If that disc plays properly, you may assume that the first disc is damaged and
unplayable.
MS9933TT_050304.p65
button to begin playback. The changer will search
button
16
16
button again. The
button.
3/5/2004, 10:25