Loading The Multipurpose Feeder - Lexmark CS410 Quick Reference Manual

Loading the multipurpose feeder

1
Push the multipurpose feeder latch to the left.
2
Open the multipurpose feeder.
3 Pull the multipurpose feeder extender.
Note: Guide the extender gently so that the multipurpose feeder
is fully extended and open.
4
Prepare the paper for loading.
•
Flex sheets of paper back and forth to loosen them. Do not fold
or crease the paper. Straighten the edges on a level surface.
• Hold transparencies by the edges. Straighten the edges on a
level surface.
Note: Avoid touching the printable side of transparencies.
Be careful not to scratch them.
•
Flex a stack of envelopes back and forth to loosen them.
Straighten the edges on a level surface.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
4
5 Locate the maximum paper fill indicator and tab.
Note: Make sure the paper or specialty media is below the
maximum paper fill indicator located on the paper guides.
2
1
5
4 3
1 Width guide tab
2 Maximum paper fill indicator
3 Width guide
4 Feeder extender
5 Paper size indicator