Fujitsu Siemens Computers Mainboard D2140 Technical Manual page 19

Internal ports and connectors
Using external audio connections
Depending on driver version and operating system the functions may differ from this
i
presentation. If necessary, further information is provided in the respective help system of
drivers and software.
Selecting settings for 2, 4 or 6-channel audio mode
Depending on the driver for the audio mode and from the operating system used, you can configure
the audio properties, e.g. with Windows 2000 under Start - Settings - Control Panel - Sounds and
Multimedia.
10 - English
Analogue 2-channel audio output
With the 2-channel configuration the functions
1
Line-Out, Line-In and MIC are available.
2
1 = Line-In (blue)
3
2 = Line-Out (front channels, green)
3 = MIC (red)
Analogue 4-channel audio output
Line-In is converted into the Rear-Out function
1
with the 4-channel configuration.
2
1 = Line-In (rear channels, blue)
2 = Line-Out (front channels, green)
3
3 = MIC (red)
Analogue 6-channel audio output
Line-In and MIC are converted into the function
1
Line-Out with the 6-channel configuration.
2
1 = Line-In (rear channels, blue)
3
2 = Line-Out (front channels, green)
3 = MIC (centre and subwoofer channel, red)
A26361-D2140-Z120-1-7419, edition 1