Emerson NR290TTC Owner's Manual page 15

Programmed Playback
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You cannot program tracks while a disc is playing.
1.) Press the PROGRAM button to enter the
Program Mode. The Program number "0" and the
PROG. indicator flash.
2.) Press the SKIP FWD. Or SKIP REV. buttons to
select the first track number you wish to enter in
the program memory.
Example: Track Number " 8" .
3.) When the desired track number appears on the
display, press the PROGRAM button again to
enter that track in memory. The program number
"0" flashes.
Repeat Steps 2-3, selecting a different track number each time until you
4.)
have entered up to 20 tracks in the program memory.
Note: You may program the same track number to play multiple times in
the program sequence if desired.
5.) Press the PLAY/PAUSE button to begin
Programmed playback. The PROG. indicator.
Flashes .
Playback will begin with the first track you programmed and will continue
until the last programmed track has played.
14
POWER
RANDOM
PROG.
POWER
RANDOM
PROG.
POWER
RANDOM
PROG.
POWER
RANDOM
PROG.