Desa VCBK4L Installation And Operating Instructions

INSTALLATION AND OPERATING INSTRUCTIONS

INSTALLING BLOWER BEFORE MOUNTING FIREPLACE

Note: Fireplace must be properly connected to a 110V power source
before blower can be operated.
1. Remove large knockout tab (see Figure 1).
2. Align two holes on side of rectangular bracket with two holes
on side frame. Secure with screws provided (see Figure 7).
3. Place blower assembly in fireplace and plug male electrical
connector into female connector already in fireplace. Make sure
Fireplace
MODELS: VCBK4R &VCBK4L FAN KIT
Knockout Tab
Electrical Connection
Figure 1
Blower
Assembly
Sheet Metal
Screws
Figure 3
rocker switch wire protrudes through notch in fireplace side (see
Figure 2). Connect wires with rocker switch.
4. Take four sheet metal screws provided and secure blower as-
sembly to fireplace through holes (see Figure 3). Blower should
now be in place and look similar to Figure 4.
Note See instructions on reverse side if FULL VIEW glass doors
are installed.
Fireplace
Rocker Switch
and Wiring
Rectangular
Bracket
ON/OFF Switch
Blower
Assembly
Male Electrical
Connector
Figure 2
Fireplace Face
Figure 4