200 miles. At a minimum, these vehicles require sig- nificant modification, such as the use of an aftermarket product, to make them towable. The availability of a Demco Tow Bar Base Plate does not imply that these vehicles can be modified or that there is an aftermarket product available.
Page 3
5. Remove six bolts that hold bumper on, four on the top 2. Remove one screw from each side, facia to fender. side and two underneath. Set bumper aside tempo- rarily. 3. Remove six plastic push fasteners from bottom side of facia and one screw from each side that attaches to wheel well extension.
Page 4
8. Slide spacer bushing into large hole in frame, on each side, from inside of frame outwards. 11. Drill 3/8 holes, two on each side, through sides of base plate as shown in pictures. Use 3/8 x 1 bolts, 3/8 lock washers, and 3/8...