Replacing The Video Graphics Board; Palmrest Assembly - Dell Latitude C800 Service Manual

Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual
2. Remove the keyboard.
3. Remove the
4. Detach the display flex cable
5. Remove the three 8-mm screws that secure the video graphics board.
6. Separate the video graphics board from the system board connector.

Replacing the Video Graphics Board

1. Align the three screw holes and press down firmly on the word "Dell" to seat the
board in its connector.
NOTICE: Make sure the board is correctly and firmly seated before continuing.
Failure to do so will cause intermittent video failures.
2. Replace the three screws.

Palmrest Assembly

NOTICE: Disconnect the computer and attached devices from electrical outlets and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
Palmrest Assembly
file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (32 of 49) [2/28/2004 8:00:16 AM]
hinge cover.
from the strain relief and the graphics card.