Removing The Display Panel - Dell Latitude C800 Service Manual

Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual
2. Remove the four 4-mm screws located across the top of the bezel.
3. Use a scribe at the indentations to pry out the two plastic screw covers located at
the bottom of the bezel.
4. Remove the two 4-mm screws located at the bottom of the bezel.
5. Separate the bezel from the display-assembly top cover.
The bezel is secured to the display assembly top cover with plastic tabs around the
sides. Use a plastic scribe to help separate the bezel from the top cover.

Removing the Display Panel

1. Remove the
2. Detach the display flex cable
3. Remove the
4. Remove the 4-mm screw securing the plastic flex cable mounting bracket to the top
cover assembly.
5. Remove the six 3-mm screws (three on each side) from the right and left sides of
the panel.
6. Lift the display panel and flex cable out of the top cover assembly.
7. Disconnect the flex cable from the two connectors (a ZIF and a standard connector)
on the display panel assembly.
Flex Cable Connectors on Display Panel
file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (22 of 49) [2/28/2004 8:00:16 AM]
hinge cover.
from the strain relief and the graphics card.
display assembly bezel.