ZyXEL Communications Prestige 320W Support Notes page 49

P320W Support Notes
5. When you reach the farthest point of connection mark the spot. Now you move the access point to this
new spot as have already determine the farthest point of the access point installation spot if wireless
service is required from corner of the room.
6. Repeat step 1~5 and now you should be able to mark an RF coverage area as illustrated in above
picutre.
7. You may need more than one access point is the RF coverage area have not cover all the wireless
service area you needed.
8. Repeat step 1~6 of survey on site as necessary, upon completion you will have an diagram and
information of site survey. As illustrated below.
49
All contents copyright (c) 2005 ZyXEL Communications Corporation.