ZyXEL Communications Prestige 320W Support Notes page 44

1. From the Web Configurator main menu, go to Network > Wireless LAN > General
2. Select 802.1x+Dynamic WEP to enable 802.1x authentication function.
3. Click Apply to make your setting work.
After 802.1x authentication function is enabled, you have to setup the authentication server, you need to
specify the location and port of an
•
Using External RADIUS Authentication Server
RADIUS is based on a client-server model that supports authentication, authorization and accounting.
The wireless AP is the client and the server is the RADIUS server.
The authenticator includes the RADIUS client, which is responsible for encapsulating and decapsulating
the Extensible Authentication Protocol (EAP) frames and interacting with the authentication server. When
the authenticator receives EAPOL frames and relays them to the authentication server, the Ethernet
header is stripped and the remaining EAP frame is re-encapsulated in the RADIUS format. The EAP
frames are not modified or examined during encapsulation, and the authentication server must support
EAP within the native frame format. When the authenticator receives frames from the authentication
server, the server's frame header is removed, leaving the EAP frame, which is then encapsulated for
Ethernet and sent to the supplicant.
external RADIUS authentication
All contents copyright (c) 2005 ZyXEL Communications Corporation.
P320W Support Notes
server.
44