Figure 31 Manually Assign A Wep Key; Figure 32 Wireless Lan Setup 3; Table 16 Manually Assign A Wep Key - ZyXEL Communications P-660HW-DX User Manual

Chapter 3 Wizard Setup for Internet Access

Figure 31 Manually assign a WEP key

The following table describes the labels in this screen.

Table 16 Manually assign a WEP key

LABEL
Key
Back
Next
Exit
5 Click Apply to save your wireless LAN settings.

Figure 32 Wireless LAN Setup 3

64
DESCRIPTION
The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 ASCII characters or 10, 26 or 58 hexadecimal characters ("0-9",
"A-F") for a 64-bit, 128-bit or 256-bit WEP key respectively.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
P-660HW-Dx User's Guide