Lenovo Aptiva Hardware Maintenance Manual page 24

Diagnostic Error Code
035-0XX-XXX
RAID interface Failure
035-195-XXX
RAID interface Test aborted
by user
035-196-XXX
RAID interface test halt,
error threshold exceeded
035-197-XXX
RAID interface test warning
035-198-XXX
RAID interface test aborted
035-199-XXX
RAID interface test failed,
cause unknown
071-000-XXX
Audio port Interface Test
Passed
071-00X-XXX
071-01X-XXX
071-02X-XXX
Audio port error
071-03X-XXX
Audio port failure
071-04X-XXX
Audio port failure
071-195-XXX
Audio port Test aborted by
user
14
IBM PC 300/IntelliStation/Aptiva Vol 2 HMM
FRU/Action
1. RAID signal cable
2. RAID device
3. RAID adapter card, if
installed
4. System board
1. Information
2. Re-start the test, if
need to
1. Depress F3 to review
the log file.
2. Re-start the test to
reset the log file.
1. Make sure
component that is
called out is enabled
and/or connected
2. Re-run test
3. Component that is
called out in warning
statement
4. Component under test
1. If a component is
called out, make sure
it is enabled and/or
connected
2. Flash the system and
re-test
3. Go to "Undetermined
problem" section.
1. Go to "Undetermined
problem" section.
2. Flash the system and
re-test
3. Replace component
under function test.
1. No action
1. Run Setup
2. Flash the system
3. System board
1. Speakers
2. Microphone
3. Audio card, if installed
4. System board
1. Run Setup
2. Audio card, if installed
3. System board
1. Information
2. Re-start the test, if
need to