Electrolux E36GC65ESS - 30"""" Drop-in Gas Cooktop Use & Care Manual page 19

CLEANINGKNOBSANB KNOB BEZ S
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The control knobs provided with this cooktop are designed for ease of use and
longevity. The "D" shaped design of the knob shaft ensures proper orientation
when reinstalling the knob.
The knobs are made of a composite plastic. These components should be washed
regularly in warm, soapy water. Hand dishwasNng Hquid is excellent for this task.
Knobs should be removed by gently pulling them straight out and off of the valve
shafts. The spill protectors should be cleaned in place. Use caution to avoid
introduction of moisture into the control panel behind the bezels. To replace knobs,
align the "Doshaped" opening at the bottom of the knob with the "Doshaped" valve
shaft, then carefully press the knob onto the valve.
OL,,,,,EAHIIH@ BUBNEB BASES
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The burner base is permanently attached to the cooktop. The base should be
wiped clean using a soft cloth or sponge that has been lightly dampened with warm
water and hand dishwashing liquid. Thoroughly clean and dry the igniters to prevent
constant sparking of the reignition system. Refer to the Cleaning the Burner
Igniters section for cleaning tips.