DANE-ELEC SO SMART User Manual page 35

Chapter 4: Connecting So Smart to a Network
SETTING ENCRYPTION OPTIONS:
Encryption (WEP):
◈ Using the So Smart Remote, navigate to Encryption (WEP)
and press ENTER/SELECT.
◈ Select, choose and apply the encryption (WEP) settings used
by the network. If you choose WEP option, ensure that the WEP
key (to be entered in the next option) correctly matches the
WEP-key set on the network router.
NOTE: Under Wireless Network connection, media streaming may experience lag or jitters for some HD video files. Such problems are
caused primarily due to insufficient bandwidth available via common home-based wireless routers. Wired 10/100 LAN connections are
recommended for streaming of HD-video.
WEP
35
ENTERING SSID:
Using the So Smart Remote, navigate to ESSID and press
ENTER/SELECT.
◈ A Key-Panel Window pops up on the TV Screen. On the
Key
◈ Panel Window, navigate and SELECT each alphanumeric
character to manually enter the SSID.
◈ Once done, navigate to OK and press ENTER / SELECT.
ENTERING WEP KEY:
◈ Using the So Smart Remote, navigate to WEP and press ENTER/SELECT.
◈ A Key-Panel Window pops up on the TV Screen. On the Key Panel
Window, navigate and SELECT each alphanumeric character to
manually enter the WEP accurately. Be cautious of upper case versus
lower case letters.
◈ Once done, navigate to OK and press ENTER / SELECT.
Select "Apply" to apply wireless network settings and press SETUP
button on the Remote to apply your changed settings.