Lightolier ProSpec 26070 Specification

Page 1 of 2
Ordering Information
Catalog No.
26070MWH
26070MBK
Features
1. Track attachment fitting: die-cast aluminum with separate mechanical and
electrical functions. Fitting cannot be engaged or disengaged while fixture is
powered. Polarity is not a concern with ProSpec track because of its sym-
metrical positioning of circuits within the track, adapters are reversed to
access one or the other circuits.
2. Stem: 5/8" O.D. .048" wall, stainless steel.
3. Locking feature: die-cast aluminum mechanism permits the locking of the
horizontal and vertical positions simultaneously by clamping jaws. When the
stainless steel braking lever is released, the horizontal and vertical functions
remain fully tensioned to hold aiming positions. Adjustment range is: hori-
zontal 0-340°; vertical 0° (NADIR) - 90°.
4. Housing: 20 ga. (.036") steel, hemmed front edge for stiffness, prevents
chipping and enhances appearance.
5. Lampholder: double contact bayonet base with 250°C #18 gauge Teflon
leads.
6. Lamp and accessory support: .029 steel, flared for easy entry cartridge
matte black finish.
7. Lens retaining ring: .075" O.D. spring steel.
8. Accessory cartridge: .09 wall extruded aluminum, installs and removes
with a twist and lock action. Holds three accessories max. and cross blade
baffle.
9. Cross blade baffle: .070" extruded aluminum (removable).
10. Lever: energizes fixture electrically by 90° rotation.
11. Clamping tabs: expands or releases gripper springs from track ledge; grip-
per springs hold attachment fitting securely within track.
12. Transformer: 50W magnetic transformer, 120V primary, 12V secondary,
maximum.
13. Lamp Cover Glass: .09 tempered borosilicate.
Finish
All painted finishes are powder coated baked enamel.
Finishes
Matte White
Matte Black
®
™
ProSpec
Mountings
™
ProSpec Track System
Options & Accessories
Accessories: 2 1/2" dia. series. Filters, lenses, screens and louvers. (3)
Accessories maximum, including lamp cover glass. Lamp cover glass may be
replaced with solid glass accessory.
Electrical
Electrical components: Polycarbonate moldings.
Contacts: Heavy gauge 1/2 hard brass developed for Lightolier's "U" shaped
track conductors.
Dimming
Dimming controls: use only dimmers specifically designed for use with magnetic
transformers, like Lightolier Onset
Lightolier Controls dimming system. Low voltage fixtures may produce audible
sound when used with dimmers, which may be objectionable in acoustically
critical areas.
Labels
UL; I.B.E.W.
Teflon ® is a registered trademark of E.I. Dupont.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Track Lighting
Low Voltage Cylinder AR70
Lamps
AR70 50W Max.
® , Sunrise ® series LV or VA dimmers, or any
Type:
www.lightolier.com
26070