Device Information - D-Link DIR-301 User Manual

Section 3 - Configuration
This page displays the current information for the DIR-301. It will display the LAN, WAN, and Wireless information.
If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
LAN: Displays the MAC address and the private
(local) IP settings for the router.
WAN: Displays the MAC address and the public IP
settings for the router.
Wireless Displays whether or not the status of the
JumpStart: JumpStart feature is enabled or disabled.
Wireless:
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
D-Link DIR-301 User Manual

Device Information

0