Internet Setup; Dynamic (Cable) - D-Link DIR-301 User Manual

Section 3 - Configuration
Dynamic IP Choose Dynamic IP Address to obtain IP Address
Address: information automatically from your ISP. Select this option
if your ISP does not give you any IP numbers to use. This
option is commonly used for Cable modem services.
Host Name:
The Host Name is optional but may be required by some
ISPs. The default host name is the device name of the
Router and may be changed.
The default MAC Address is set to the WAN's physical
MAC Address:
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP.
The default MAC address is set to the WAN's physical
Clone MAC
interface MAC address on the Broadband Router. You
Address:
can use the "Clone MAC Address" button to copy the MAC
address of the Ethernet Card installed by your ISP and
replace the WAN MAC address with the MAC address
of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Primary DNS
Addresses: Enter the Primary DNS (Domain Name Server) server IP address assigned by your ISP.
Secondary DNS
This is optional.
Address:
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the
default MTU.
D-Link DIR-301 User Manual

Internet Setup

Dynamic (Cable)

1