System Settings - D-Link DIR-301 User Manual

Section 3 - Configuration
Save Settings to Use this option to save the current router
Local Hard Drive: configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Use this option to load previously saved
Load Settings
from Local Hard router configuration settings. First, use the
Drive: Browse control to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
This option will restore all configuration settings
Restore to Factory
Default Settings: back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Click Enabled to use the JumpStart function.
JumpStart
function: If your wireless router uses JumpStart, please
check the adapter for instructions.
Reset JumpStart: Use this option to reset the JumpStart feature.
D-Link DIR-301 User Manual

System Settings

3