Using Windows ® Xp - D-Link DIR-455 User Manual

Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows XP
®
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2
®
users. If you are using another company's utility or Windows 2000, please refer to the user manual of your wireless adapter for help with
®
connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows XP utility as seen below.
®
If you receive the Wireless Networks Detected bubble, click on the center
of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select View Available Wireless Networks.
The utility will display any available wireless networks in your area. Click on
a network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check the TCP/IP
settings for your wireless adapter. Refer to the Networking Basics section
in this manual for more information.
D-Link DIR-455 User Manual 74