Dhcp Server Settings - D-Link DIR-455 User Manual

Section 3 - Configuration
The DIR-455 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network
that request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses,
which is automatically assigned to the clients on the network.
Enable DHCP Server:
DHCP IP Address Range:
DHCP Lease Time:
Primary DNS IP Address:
Secondary DNS IP Address:
Primary WINS IP Address:
Secondary WINS IP
Address:
D-Link DIR-455 User Manual

DHCP Server Settings

Select this box to enable the DHCP
server on your router.
Enter the starting and ending
IP address for the server's IP
assignment.
The time period for the IP address
lease. Enter the Lease time in
minutes.
Primary DNS IP Address: assign
a primary DNS Server to DHCP
clients.
Secondary DNS IP Address: assign a DNS Server to DHCP clients.
Primary WINS IP Address: assign a primary WINS Server to DHCP clients.
Secondary WINS IP Address: assign a WINS Server to DHCP clients.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
27