Wireless Settings - D-Link DIR-455 User Manual

Section 3 - Configuration
This section will help you to manually configure the wireless settings of your router. Please note that changes made on this section may
also need to be duplicated on your Wireless Client.
Enable Wireless:
Wireless Network Name:
802.11 Mode:
Auto Channel Scan:
D-Link DIR-455 User Manual

Wireless Settings

WIRELESS NETWORK SETTINGS
Select this checkbox to enable wireless
access. When you set this option, the
following parameters take effect.
Also known as the SSID (Service
Set Identifier), this is the name of
your Wireless Local Area Network
(WLAN). Enter a name using up to 32
alphanumeric characters. The SSID is
case-sensitive.
Mixed mode: Enable this mode if your
network contains a mix of 802.11b and
802.11g devices.
G mode: Enable this mode if your
network has only 802.11g devices. If you
have both 802.11b and 802.11g wireless
clients, disable this mode.
A wireless network uses specific channels in the wireless spectrum to handle communication between clients.
Some channels in your area may experience interference from other electronic devices. Choose the clearest
channel to help optimize the performance and coverage of your wireless network.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
24