Tunnel 1 - Manual Key - D-Link DIR-455 User Manual

Section 3 - Configuration
Choose MANUAL in the Method field, and press the More button to continue following configuration.
Tunnel Name:
Local Subnet:
Local Netmask:
Remote Subnet:
Remote Netmask:
Remote Gateway:
Life Time:
Encapsulation Protocol:
Local SPI:
D-Link DIR-455 User Manual

Tunnel 1 - Manual Key

Indicate a tunnel name for this VPN configuration.
The subnet of the VPN gateway's local network. It can be a host, a partial subnet or a whole subnet.
Local netmask combined with local subnet to form a subnet domain.
The subnet of the remote VPN gateway's local network. It can be a host, a partial subnet, or a whole subnet.
The netmask of the remote VPN gateway's local network.
The WAN IP address of remote VPN gateway.
The unit of life time is based on the value of Life Time Unit. The value of unit is second, the value of life time
represents the life time of dedicated VPN tunnel between both end gateways. Its value ranges from 300
seconds to 172,800 seconds.
Select ESP or AH.
SPI is an important parameter during hashing. Local SPI will be included in the outbound packet transmitted
to WAN side of local gateway. The value of local SPI should be set in hex format.
34