Download Print this page

Emerson EM-227MX Owner's Manual

Emerson headphones user manual


Quick Links

Wireless Headset

Model EM-227MX

FCC information

FCC Part 15
This equipment has been tested and found to comply with the requirements
for a Class B digital device under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are intended to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Re-orient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the
party responsible for compliance could void the user's authority to operate
the equipment.
Drive safe
Driving while talking on your mobile phone is dangerous, and illegal in
many states.
Although this device enables drivers to conduct handsfree conversations,
it is still dangerous to drive and use a mobile phone at the same time.
We recommend pulling over before making or answering calls, especially
during adverse driving conditions. Please use your mobile phone, and
our product responsibly while driving!

Safety information

● Check local laws regarding use of a mobile handset and wireless headset
while driving. If you use the Bluetooth Headset while driving, ensure your
attention and focus remains on your driving.
● Observe all signs in the designated areas where some electronic devices
or RF radio products are required to be switched off. These could
include airplanes, hospitals, blasting areas, and potentially explosive

Location of controls

Volume up/down
Indicator light
Indicator light
Charging Socket
Charging Socket
USB Charging Cable
Charging the Bluetooth headset
1. Connect the USB cable to the charging socket on the headset.
2. Connect the other end of the USB cable to the:
● AC Charger, and plug into a wall (A/C) outlet.
● Computer's USB port.
3. The RED LED indicator light turns on.
4. The RED LED indicator light shuts off when the headset is 60% charged.
(to fully charge the headset 12 hours charging is required)
USB Charging Cable
NOTE: Make sure you charge your headset for 12 hours before using it for
the first time.
Pairing the headset with a Bluetooth enabled phone
1. Keep your Bluetooth Headset and mobile phone within 3 feet of each
other during pairing.
2. Make sure the Bluetooth Headset is turned off.
3. Press and hold the [POWER] button until the RED and BLUE lights
flash alternately.
4. Set the phone to search for bluetooth devices.
5. When the phone finds the headset, confirm by selecting EM227 from the
Power Button
Power Button
AC Charger
3 size earbuds
AC Charger
EM227MX added



Related Manuals for Emerson EM-227MX

Summary of Contents for Emerson EM-227MX

  • Page 1: Location Of Controls

    IN THE BOX: Medium USB Charging Cable AC Charger 3 size earbuds ● AC Charger, and plug into a wall (A/C) outlet. ● Computer’s USB port. USB Charging Cable EM227MX EM227MX EM227MX added 0000 Earbud Microphone Small Large Owner’s Manual AC Charger...
  • Page 2: Warranty Information

    Left ear Bluetooth Headset. Manufactured by Southern Telecom Inc. Brooklyn NY. 11232 Emerson and G-Clef logo are registered trademarks of Emerson Radio Corp. Parsippany, New Jersey USA. The Bluetooth © 2009 AIT Inc. All rights reserved.