Advanced Settings; Wan; Lan - Asus WLAM604g User Manual

11g wifi adsl router

Hide thumbs Also See for WLAM604g:

Table of Contents

WL-AM604g 11g WiFi ADSL Router User Manual

xDSL

LINK

ACT

Advanced settings

This chapter shows how to configure other advanced router features of WL-AM604g.

Click Advanced Setup -> WAN in the navigation menu to enter the WAN setup page.

This page allows you to edit the WAN settings.

LAN

1. Click Advanced Setup -> LAN in the navigation menu to enter the Local Area

Network (LAN) Setup page. This page allows to change the IP address and subnet

mask of the router, enables or disables UPnP, IGMP snooping, and DHCP server.

The default settings are:

• IP Address:

• Subnet mask:

• Enable UPnP:

• Enable IGMP Snooping: No

• Enable DHCP Server: Yes

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.254

Lease Time (hour):

By default, DHCP server is enabled. The DHCP server enables you to assign the

addresses for to the LAN computers.

2. Press Save to save the configurations and go on setting up the other features. If all

settings are complete, press Save/ Reboot to apply the settings and reboot WL-

AM604g.

192.168.1.1

255.255.255.0

Yes

Table of Contents