Table of Contents
Advertisement
Chapter 3 - Software Configuration
Wireless bridge (also known as Wireless Distribution System or WDS)
allows you to connect to one or many Access Points.
Access Point
AP Mode configures the ASUS 802.11g AP for a specific purpose. By
default, the ASUS 802.11g AP is set to serve as an "Access Point" where a
wireless mobile client can connect wirelessly to a wired Ethernet network.
WDS Only
With WDS, the ASUS 802.11g AP can only communicate with other Access
Points.
Hybrid
Hybrid allows you to use the ASUS 802.11g AP both as an access point
and as a wireless bridge.
Channel
Both Access Points in Wireless Bridge mode must be set to the same channel.
Connect to APs in Remote Bridge List (Yes/No)
Select Yes to connect to access points in the remote bridge list.
Allow anonymous? (Yes/No)
Select Yes to allow users without accounts to connect.
Note: If "Connect to APs in Remote Bridge List" and "Allow Anony-
mous" are both set to "No", it means that this AP will not connect with
other APs and therefore the AP mode setting will return to "AP Only".
30
ASUS 802.11g Access Point
Advertisement
Table of Contents
