After Using In Water - Panasonic Viera Link HX-WA10 Owner's Manual

After using in water

After using the camera in water, wash it with fresh water and dry it completely.
1
Turn off the camera, and close the battery cover and terminal cover
securely.
2
Wash the camera with fresh water.
h Fill a shallow basin with fresh water, and immerse the closed camera for
about 10 minutes. Rotate the monitor unit several times to clean it
completely.
3
Dry the camera.
h Use a dry cloth to wipe off any drops adhering to the camera, and leave
it to dry completely in a well-ventilated place away from direct sunlight.
h Do not use a hair dryer or the like to dry the camera. Exposing the
camera to high temperatures may cause the camera and/or waterproof
seal to become deformed.
h If there is salt, for example, on the unit,
the hinge portion of the battery cover
or terminal cover may become white.
Wipe the affected area with a cotton
swab moistened with water until the
white deposit is removed. After wiping,
use the supplied brush to lightly brush
the area.
h If moisture adheres to the microphone
or speaker, the volume may decrease
and it may become difficult to hear the
audio. Place the camera so that the microphone and speaker are facing
downward to remove the water, then wipe away the moisture. Allow the
camera to dry for a while before using it again.
h Do not insert any pointed object in the microphone or speaker holes.
(Doing so may damage the internal waterproof sheet and impair the
waterproof functionality.)
HINT
i The sound cannot be recorded clearly when there is water inside the
microphone. Wipe off all droplets from the camera.
About the handstrap
i Wash the handstrap in fresh water after detaching it from the camera.
i After washing, leave it to dry in a place away from direct sunlight.
70
VQT3P35
Hinge part