Selecting Files To Transfer - Panasonic HX-DC2 Operating Instructions Manual

∫ Using direct mode
The files can be transferred directly from the Eye-Fi card to a smartphone
or tablet without going through the access point when necessary setting
is performed in a PC in advance.
≥ Install the software supplied with the Eye-Fi card on your PC, and
configure the direct mode settings.
Select the menu.
# [Eye-Fi] # [START DIRECT MODE]
[MENU]:
3
≥ If any of the following operations is performed, the direct mode will be
cancelled.
j If you turn the unit off
j Closing the LCD monitor, sending the unit into standby mode.
j Starting motion picture or audio recording
The direct mode may be cancelled by the Eye-Fi card for reasons other
than the above.
≥ In direct mode, the economy mode function (l 21) is disabled.
≥ When [TRANSFER] (l 134) is set to [OFF], [START DIRECT MODE]
cannot be selected.

∫ Selecting files to transfer

If you perform the required settings in advance on your PC, you can
transfer selected files alone. For settings methods etc., please read the
card operating instructions or consult the card manufacturer.
≥ Install the software supplied with the Eye-Fi card on your PC, and
configure the selection transfer settings.
Select the menu.
# [TRANSFER/PROTECT]
[MENU]:
1
≥ The settings method is the same as for the protect settings. (l 100)
≥ For the files set for selected transfer,
thumbnail screen (1-file display).
≥ If you have not performed selected transfer settings on your PC,
[PROTECT] is displayed and the selection transfer setting is disabled.
is displayed on the
- 135 -