Displaying The Picture - Hitachi ED-X24Z User's Manual And Operating Manual

Displaying the picture

1.
Activate your signal source. Turn the signal
source on, and make it send the signal to
the projector.
2.
Use the VOLUME + / VOLUME - buttons to
adjust the volume.
To have the projector silent, press the MUTE
button on the remote control.
3.
Press the INPUT button on the projector.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to select
an input signal.
Use the VIDEO button to select an input
signal from the following ports.
<ED-X24Z>: S-VIDEO, VIDEO
<ED-X40Z, ED-X42Z>: COMPONENT (Y, Cb/Pb,
, S-VIDEO, VIDEO
Use the COMPUTER button to select an input
signal from the following ports.
<ED-X24Z>: COMPUTER IN
<ED-X40Z, ED-X42Z>: COMPUTER IN1,
COMPUTER IN2
4.
Press the ASPECT button on the remote
control. Each time you press the button, the
projector switches the mode for aspect ratio in
turn.
5.
Use the zoom ring to adjust the screen size.
6.
Use the focus ring to focus the picture.
CAUTION
other method of blocking the projection light, such as attaching something to
the lens or placing something in front of the lens, may cause the damage to the
projector.
The ASPECT button does not work when no proper signal is inputted.
NOTE
in the CD.
12
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
FREEZE PAGE VOLUME
MAGNIFY
VOLUME+ button
UP
ON
DOWN
VOLUME- button
OFF
KEYSTONE MY BUTTON MUTE
MUTE button
1 2
POSITION MENU
ENTER
RESET
ESC
INPUT button
VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
COMPUTER button
AUTO
ASPECT SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
ASPECT button
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
Zoom ring