Dvd Setup; Audio Setting; Virtual Surround; Display Setting - Hitachi DV-PF4EUK Instruction Manual

DVD SETUP

Audio Setting

Set your surround modes for DVD/VCR through your receiver
or processor. DVD's audio setup will not affect CD playback.
1
In STOP menu press SETUP.
2
Press s or B to select "CUSTOM",
then press ENTER.
• CUSTOM menu will appear.
3
Press s or B to select "AUDIO",
then ENTER to confirm.
4
Press K or L to select an item,
then press ENTER.
DRC (Dynamic Range Control) :
• To compress the range of sound volume.
• DRC function is available only on the discs that are
recorded in the Dolby Digital format.
• The default setting is ON.
DOWN SAMPLING :
• Set to ON when outputting in 48kHz.
• Set to OFF when outputting the original sound.
• When playing disc with copyright protection, the sound
will be down sampled at 48kHz even if you set it to
OFF.
• DOWN SAMPLING function is available only on digital
output of a disc recorded in 96kHz, and when the unit
is connected to another source using the digital out
jack.
• DOWN SAMPLING function is available only on the
discs that are recorded in the Dolby Digital format.
• The default setting is ON.
QUICK
DOLBY DIGITAL :
Set to BITSTREAM when the DVD/VCR is connected to
Dolby Digital Decoder.
(BITSTREAM : Dolby Digital OUTPUT)
(PCM : Converts the Dolby Digital to PCM)
• The default setting is BITSTREAM.
QUICK
MPEG :
BITSTREAM: Output MPEG sound
Set to BITSTREAM when the unit is connected to an
MPEG Decoder
• The default setting is PCM.
5
Press SETUP to exit.

Virtual Surround

You can enjoy stereophonic virtual space on your existing 2
channel stereo system.
1
Press SURROUND during playback.
2
Press SURROUND to set it
1(Natural effect), 2(Emphasized
effect) or OFF.
3
Press MODE or RETURN to exit.
NOTES:
• Virtual Surround will not be effective if the surround
mode is set to any selection other than STEREO (for
CD play only).
• Turn down the level or turn it "OFF" if the sound is dis-
torted.
• The setting will be saved even if the DVD/VCR is
turned off.
DVD
You can change certain aspects of the DVD display screens,
on-screen messages and the display panel on the front of
the DVD/VCR.
1
Press SETUP in STOP mode.
2
Press s or B to select "CUSTOM", then press ENTER.
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
3
MPEG PCM
Press s or B to select "DISPLAY", then press ENTER to
confirm.
4
Press K or L to select from an item, then press
ENTER.
TV ASPECT :
STILL MODE :
ANGLE MARK :
LOGO:
5
Press SETUP to exit.
NOTE:
DVD CD
OFF
– 28 –

Display Setting

• CUSTOM menu will appear.
QUICK
• Press K or L for an item selec-
tion, then press ENTER.
• 4:3 LETTER BOX displays a
theater-like image. Black bars
appear at the top and bottom of
the screen.
• 4:3 PAN-SCAN is the traditional TV mode with a full
height picture with both sides trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD/VCR.
• The default setting is 4:3 LETTER BOX.
• Press K or L for an item selection (AUTO, FIELD or
FRAME), then press ENTER.
• Select AUTO usually.
• If you select FIELD, pictures in the still mode will be
stabilized although they will be coarse due to little
amount of data.
• If you select FRAME, pictures in the still mode will be
highly defined although they will be blurred due to out-
put of two fields at the same time.
• The default setting is AUTO.
• Press ENTER repeatedly to turn Angle mark ON or
OFF.
• The default setting is ON.
• Press ENTER to switch ON (opening picture)/OFF (black).
• The default setting is ON.
• Be sure to press SETUP, or the setting will not work.
DVD
DISPLAY
TV ASPECT 4:3 L-BOX
STILL MODE AUTO
ANGLE MARK ON
LOGO ON
EN