Table of Contents
Advertisement
PLAYING A DISC
Audio Language
The DVD/VCR allows you to select a specific language
during DVD disc playback when multiple languages are avail-
able.
1
Press AUDIO during playback.
2
Press AUDIO repeatedly to select your desired language.
NOTES:
• If your language is not shown after pressing AUDIO
several times, the disc may not have that language.
However, some discs allow you to change audio lan-
guage setting in the disc menu. (Operation varies
depending on the disc, so refer to the manual included
in the disc.)
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Audio language setting. If you choose any other
languages, "---" will be displayed instead. (Refer to
page 29.)
Stereo Sound Mode
1
Press AUDIO repeatedly during playback to select
between "STEREO", "L-CH" or "R-CH".
STEREO - both right and left channels are active
L-CH - only left channel is active
R-CH - only right channel is active
NOTES:
• If the Virtual Surround setting is "1" or "2", the sound
mode will be fixed to STEREO, and can not be changed.
Subtitle Language
DVD
The DVD/VCR allows you to select a language for subtitle (if
available) during DVD disc playback.
1
Press SUBTITLE during playback.
2
Press SUBTITLE repeatedly to select your desired subti-
tle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3
To turn off subtitles, press s or B until "OFF" appears.
NOTES:
• If your language is not shown after pressing SUBTITLE
several times, the disc may not have that language.
However, some discs allow you to change subtitle lan-
guage setting in the disc menu. (Operation varies
depending on the disc, so refer to the manual included in
the disc.)
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Subtitle language setting. If you choose any other
languages, "---" will be displayed instead. (Refer to page
29.)
CD
Camera Angle
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
If the "ANGLE MARK" setting is "OFF" in the Display setting,
the (
) icon will not appear. (Refer to page 28.)
1
Press ANGLE during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press ANGLE repeatedly to select your desired angle.
Changing the On-Screen Display
You can check information about the current disc by pressing
DISPLAY on the remote control.
1
Press DISPLAY during play-
back to show current Chapter.
• The elapsed and remaining
time of the current chapter will be displayed.
2
Press DISPLAY again to show current title.
• The elapsed and remaining time of the current title will
be displayed.
3
Press DISPLAY again.
• The BIT RATE and the current repeat setting will be
displayed.
• If you are playing a dual layered disc, the layer number
will also be displayed (L0: Layer 0 is playing. L1: Layer
1 is playing).
4
Press DISPLAY again to remove the display.
1
Press DISPLAY during playback, the current track will be
displayed on the TV screen.
• The elapsed and remaining time of the current track will
be displayed.
2
Press DISPLAY again to show the total time of the disc.
• The elapsed and remaining time of the current total
track will be displayed.
3
Press DISPLAY again to remove the display.
– 26 –
DVD
DVD
) mark appears on the screen.
DVD
9/49
0:00:00 -0:03:30
CD
EN
Hide quick links:
Advertisement
Table of Contents
