Table of Contents
Advertisement
H9451UD(EN).qx33
03.1.22 7:22 PM
2
Press
B
to select CUSTOM, then press
ENTER.
3
Press Arrow (
then press ENTER.
4
Enter your four-digit password then press
ENTER.
5
Press Arrow (
LEVEL, then press ENTER.
6
Press Arrow (
level.
7
Press SETUP to exit
Notes
When doing this for the first time, enter any 4 digits.
¡
(except for 4737) That number will be used as the
password from the second time onward.
To change the password, press Arrow (K/L) to
¡
select CHANGE, then press ENTER. Enter the four-
digit pass-word, then press ENTER.
AUDIO SETTINGS
Choose the appropriate Audio settings for your equip-
ment as it only affect during the playback of DVD
discs.
1
Press SETUP in STOP mode.
2
Press B to select CUSTOM, then press
ENTER.
CUSTOM mode will appear.
¡
3
Press Arrow (s/ B) to select AUDIO, then
press ENTER to con-
firm.
4
Press Arrow (
items, then press ENTER.
DRC (Dynamic Range Control):
To compress the range of sound volume.
¡
The default setting is OFF.
¡
This function is effective only for the sound record-
¡
ed by Dolby Digital recording.
Page 30
s/B
) to select PARENTAL,
PARENTAL
PARENTAL LEVEL ALL
K
L
/
) to select PARENTAL
K
/
L
) to select the desired
DVD SETUP
AUDIO
DRC
OFF
DOLBY DIGITAL
BITSTREAM
DOWN SAMPLING ON
K
/
L
) to select the below
¡
With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
Record the password in case you forget it.
¡
IF YOU FORGET THE PASSWORD
1
Press 4, 7, 3, 7 at step 4.
Password will be cleared and parental level will be
¡
set to ALL.
2
Proceed the above Steps 4-6 again.
CONTROL LEVELS
¡ALL
All parental lock is cancelled.
¡Level 8
DVD software of any grade (adult/general/children)
can be played back.
¡Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
¡Level 1
Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.
Dolby Digital:
QUICK
Set to BITSTREAM when the unit is connected to a
Dolby Digital Decoder.
(BITSTREAM: Output by Dolby Digital)
(PCM: Convert the Dolby Digital to PCM)
The default setting is BITSTREAM.
¡
DOWN SAMPLING:
Set to ON when outputting in 48 kHz.
¡
The default setting is ON.
¡
When playing disc with copyright Protection
If you select OFF, copyright protection will be acti-
¡
vated and sound will be down sampled at 48kHz.
4
Press SETUP to exit.
– 30 –
EN
1L25
Hide quick links:
Advertisement
Table of Contents
