Connecting To An Amplifier Equipped With Digital Input Jacks Such As Md Deck Or Dat Deck - Emerson EWD7002 Owner's Manual

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS SUCH AS MD DECK OR DAT DECK
Use an audio coaxial digital cables (not included) for the audio connections.

Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck.

or To S-VIDEO INPUT jack
A/V-compatible
or
wide screen TV
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
Notes
¡ The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
¡ Be sure to turn off the power to all components in the system before connecting another component.
¡ Refer to the Owner's Manuals for the components to be connected to the DVD player.
¡
Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings
may generate noise distortion, and may also damage the speakers.(See page 26 to set ON for Dolby Digital
and DTS)
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV's 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video
RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video
inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked "TO
TV") to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF
Modulator for more details.
If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection,
remove that cable from your TV's antenna terminal and reconnect it to the coaxial antenna input terminal
of the RF Modulator (usually marked "ANT IN"), then connect the RF modulator to your TV's antenna
terminal as described above.
Note
¡
The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's
antenna terminal through an RF Modulator.
To VIDEO INPUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
To S-VIDEO OUT jack
To VIDEO OUT jack
Cr
R L
VIDEO Cb S-VIDEO
COAXIAL AUDIO OUT
OUT
To COAXIAL DIGITAL
AUDIO OUT jack
– 12 –
OUT
[Fig. 6]
EN
1L25