Dvd/Vcr To Tv Connection; Other Connections - Hitachi DVPF3E Instruction Manual

The following show examples of connections commonly used to connect the DVD/VCR to TV and other
components.
Notes
Be sure to turn off the power to all components in the system before connecting another component.
¡
Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
¡
DVD/VCR.

DVD/VCR TO TV CONNECTION

1. D
isconnect the TV's power cord from the AC outlet.
2. D
isconnect the VHF/UHF TV aerial cable from the TV.
3. C
onnect the VHF/UHF TV aerial cable cable to the
DVD/VCR.
4. C
onnect the DVD/VCR to the TV using the coaxial
cable.
5. P
lug the Power cords of the DVD/VCR and TV into the
AC outlets.
(TV)
to aerial socket
to RF OUT
(Back of the unit)
VHF
UHF
VHF/UHF
MIXER
AERIAL
to AERIAL
RF OUT

OTHER CONNECTIONS

EURO SCART (AV) SOCKETS
Your DVD/VCR is provided with two Scart sockets which
you may connect to other external devices with Scart sock-
ets. We recommend this connection to ensure a better audio
and picture quality.
A2 or NICAM stereo sound is only achieved when using a
SCART lead.
(TV)
to aerial
socket
to 21-Pin
Scart Jack
AERIAL
RF OUT
to RF OUT
Euro Scart cables are obtainable at your dealer.
AV1 (TV) CONNECTION TO TV
If your TV has Scart sockets, you may connect your
DVD/VCR's AV1 (TV) scart socket to the Scart socket on
the back of your TV. Please see the instruction manual for
your TV.
AV2 (DECODER) CONNECTION FOR OTHER
EXTERNAL DEVICES
The second Scart socket AV2 (DECODER) is designated
for other external devices, e.g. decoder, another VCR,
video camera and so on.
NOTE:
If you want to connect a TV with Scart socket to your
•
DVD/VCR, the TV must be connected to the DVD/VCR
through AV1 (TV). A connection to AV2 (DECODER)
will not function correctly.
EXTERNAL INPUT MODE
To receive the signal from an external input (decoder, video
camera, another VCR etc.), connect to the AV2
(DECODER) socket, and press PROG
"002" with the Number Buttons to show "AV2" on the TV
screen. ("L2" will appear on the DVD/VCR display panel.)
If you use the AV1 (TV) socket, press PROG
enter "001" with the Number Buttons to appear "AV1" on
the TV screen. ("L1" will appear on the DVD/VCR display
panel.)
If you use the front AUDIO/VIDEO In Jacks, press PROG
(o/p)
or enter "003" with number button to show "AV3"
on the TV screen. ("L3" will appear on the DVD/VCR
display panel.)
– 14 –
Decoder (Not supplied)
to 21-Pin Scart Jack
DVD
AV2 (DECODER)
S-VIDEO ANALOG DIGITAL
VCR OUT AUDIO OUT AUDIO OUT
AV1 (TV) DVD/VCR
L COAXIAL OPTICAL
AV1 (TV)
R
(o/p)
or enter
(o/p)
or
EN
2C15