Table of Contents
Advertisement
• If the S
V
number flashes when you press
HOW
IEW
SHOWVIEW, this means that the S
ber you entered was incorrect or the timer recording
you just programmed and another timer recording
overlap.
4
Confirm the channel
number, then, press
Arrow (
).
B
• If your local channel
information is programmed in
DVD/VCR's memory, your
local channel number appears automatically.
• If your local channel information is not programmed
in DVD/VCR's memory, "– –" or an incorrect chan-
nel number may appear. In this case, press Arrow ( o
/
) repeatedly until your desired channel number
p
appears. Then, press Arrow (s).
• When you select the channel number using Arrow
( o /
) it memorises in DVD/VCR's memory.
p
5
Press Arrow (
/p)
o
repeatedly
until the desired tape
speed appears.
6
Press Arrow (
/p) to choose "ON" or
o
"OFF".
• The Video Programme System (VPS) / The
Programme Delivery Control (PDC) is a very conve-
nient system which assures that the TV programmes
you have programmed for timer recording will be
recorded exactly from beginning to end (see page 27).
7
Press MENU to exit.
8
Press TIMER to activate the timer.
The TIMER light on the display comes on.
VPS (Video Programme System) /
PDC (Programme Delivery Control)
The VPS/PDC system looks for the start signal sever-
al hours before published start time and for several
hours afterwards. This means that if the programme is
broadcast anytime during this period it will be record-
ed correctly. Please note that if you have set an incor-
rect Timer setting, it will stay in the memory until you
cancel it (See page 25 for details on how to cancel a
programme).
V
num-
HOW
IEW
When timer recording is finished, the DVD/VCR will
automatically rewind the tape to the beginning where
it started recording. If there are any remaining pro-
TIMER NUMBER
1
grammes including Daily, Everyday, & Weekly,
06/05 SA
DATE
START
19:30
AUTO RETURN will not operate.
20:30
END
16
CHANNEL
SP
SPEED
1
VPS/PDC
OFF
2
3
• [AUTO] will appear next to "AUTO RETURN".
4
TO WATCH THE RECORDED TIMER PRO-
GRAMME
Press TIMER to cancel the Timer Stand-by. Then,
TIMER NUMBER
1
Select VCR mode by pressing VCR your remote.
06/05 SA
DATE
19:30
START
Press PLAY ( B) .
20:30
END
16
CHANNEL
SP
SPEED
OFF
VPS/PDC
VCR
– 27 –
– 27 –
AUTO RETURN
Press MENU.
Press Arrow (
/p) repeatedly to point to
o
"SET UP", then press Arrow (
Press Arrow (
/p) to point to "AUTO
o
RETURN", then press Arrow (
Press MENU to exit.
VCR
).
B
).
B
EN
EN
2C15
2C15
Hide quick links:
Advertisement
Table of Contents
