Getting Started; Preparation - Hitachi HDC-1086E Instruction Manual

GETTING STARTED

Preparation

1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Load the supplied
orientation as shown.
4. Insert an SD/SDHC memory card (Optional).
The camera has 16MB internal memory
(12MB available for image storage), but you
can load an SD/SDHC memory card to
expand the camera's memory capacity.
Be sure to format the memory card with this
camera before its initial usage.
5. Close the battery/memory card cover and make
sure it is locked securely.
To prevent valuable data from being accidentally erased from an SD/
SDHC memory card, you can slide the write protect tab (on the side of
the SD/SDHC memory card) to "LOCK".
To save, edit, or erase data on an SD/SDHC memory card, you must
unlock the card
To prevent damaging of an SD/SDHC memory card, be sure to turn off
the power when inserting or removing the SD/SDHC memory card. If
inserting or removing the SD/SDHC memory card with the power on, the camera will automatically turn off.
Be careful not to drop the batteries when opening or closing the battery cover.
EN-12
batteries with correct