Hitachi HDC-1086E Instruction Manual page 20

ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO fig-
ure is increased), photography will become possible even in dark locations, but the more
pixelated (grainier) the image will appear.
* Auto / 80 / 100 / 200 / 400 / 800 / 1000
Metering
This sets the metering method for calculating the exposure.
* [ o ] Average: The entire area of the screen is measured, and the exposure is calculated.
* [ q ] Spot: A very small portion of the center of the screen is measured, and the exposure
is calculated.
Sharpness
This sets the sharpness of the image that will be captured.
Saturation
This sets the saturation of the image that will be captured.
CaptureMd.
This sets the recording method at the time of capturing images.
* [Blank] Single: Captures one image at a time.
* [ ] Cont.: Permits continuous capture of up to 3 images.
* [ ] AEB: Permits 3 consecutive images in the order of standard exposure, underexpo-
sure and overexposure compensation.
* [ ] Burst: Permits continuous photography while pressing holding the shutter button.As
long as you hold the shutter button pressed, images are captured until thememory capacity
is exhausted.
* [ ] Cont.flash: Permits continuous capture of up to 3 images with flash.
* [ ] Pre-Shot: Lets you capture the background first, then have someone to capture you
in front of it.
* [ ] Coupl.shot: Uses separate areas to combine two shots. You can include yourself in
the shot.
Date Print
The date of recording can be printed directly on the still images. This function must be acti-
vated before the image is captured.
Preview
This sets whether or not to display the captured image on the screen immediately after the
image is captured.
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
EN-19